Carbide Grit Band Saw Blades - Welded to Length
Tungsten Carbide Grit Band Saw Blades Welded to Length
Innovative blade technology for the most difficult and sensitive of materials
Tungsten Carbide GRIT
Metallurgically bond diamonds to high specification steel edges
Tungsten Carbide GRIT SIZE
Medium - 50/70 grit
Coarse - 30/40 grit
GULLETED
For applications greater than 1/4” (6.4mm) in cross-section
CONTINUOUS
For applications less than 1/4” (6.4mm) in cross-section
APPLICATION:
Aircraft and Sheet Stainless Steel, Aircraft Flooring and Interiors, Aluminum Oxide, Carbon, Cast Iron, Composites, Concrete Building Panels, Fiberglass Honeycomb, Glass, Glass Block, Nickel Alloys, Nitride case, Induction Hardened, Stone and Minerals, Tires, Wire Reinforced Rubber, Titanium
Purchase
Have a question?| 30 | -20.00% | $0.00 |
| 20 | -15.00% | $0.00 |
| 10 | -10.00% | $0.00 |
| 5 | -5.00% | $0.00 |
More images
Description
Metallurgically bonded Tungsten Carbide grit forms permanent edges that replace and improve on many traditional tools.
• Cuts longer
The blades stay sharp throughout a longer life, outliving toothed blades by a wide margin. Blades can also be reversed to further extend their life.
• Cuts tougher
Tungsten Carbide grit edge blades withstand abuse and give long working life.
• Cuts smoother Tungsten Carbide blades have thousands of cutting edges and cut with a ‘grinding’ action rather than the aggressive ripping action of toothed blades,
reducing the risk of breaking brittle material and leaving the cut edges smooth often requiring no further finishing, and without chipping or damaging the surface.
• Cuts safer
SPC tools and blades cut with minimal vibration and risk of snagging.
• Cuts better
In many materials SPC tools and blades cut easily and with little effort. Curves can be cut smoothly and without danger of breakout.
• Cuts faster
The cut is faster, more aggressive; control is fine and sure. • Cuts more One SPC tool can cut many different ‘problem’ materials.
• Cuts cheaper
Long life, high performance and consistent quality bring a significantly better ROISignificant Improvements
SPC Diamond Band Saw is a significant improvement on traditional toothed or electroplated diamond alternatives and an added value performance upgrade to our successful Tungsten Carbide range of band saw blade
Cuts longer and faster
The blades stay sharper throughout a longer life and can be reversed
Cuts smoother
Minimal vibration and high stability are features of the cutting action
Cuts safer and better
Their snag free action reduces the risks of breakages and allows more aggressive cutting
Cuts cleaner
Minimal waste, and reduces chipping and cut surface damage
Cuts cheaper
Long life, high performance and consistent quality bring a significantly better ROI
Top Applications
SPC Diamond Band Saw is the tool of choice when working with the most difficult and most demanding of materials.
Diamond band saw is the most effective means of sawing composites and hard friable materials such as quartz, glass, fiberglass, friction products, carbon, compacted graphite, abrasive products, and ceramics.
Use continuous edge for material less than 1/4″ thick or for hard material with a tendency to fracture, crack, or chip easily. Gulleted blades work best for cutting larger cross sections.
